The dedicated swing screen for carbon black is a new type of high-efficiency screening machine specially designed to meet the screening requirements of high yield and high density of carbon black. Simple screening involves staring at both hands with both eyes to screen, and the swinging screening machine is a mechanical simulation of this. It successfully simulates the effective principle of manual screening motion (screening accuracy, efficiency, and screen life are 5-10 times that of conventional round screens), suitable for all fine and ultrafine ranges of powder and particulate materials, especially for difficult to handle materials. And according to the physical characteristics of the material and the different screening requirements of customers, the independently adjustable speed, eccentricity, radial force, and tangential force can be adjusted to change the material's residence time and movement path on the screening surface, achieving the best screening effect.

Characteristics of Swinging Vibration Screen

1. With high output and efficiency, the special double-layer equal mesh screen works simultaneously, doubling the production capacity of the equipment on the original basis. For example, a single ordinary swing sieve with a diameter of 20 mesh can screen charcoal powder with a processing capacity of 3 tons per hour, while a dedicated charcoal powder sieve can produce up to 6 tons per hour.

2. The screening accuracy is 5-10 times higher than that of conventional screening machines.

3. Simple screening involves staring with both eyes and using both hands to screen. The swinging screen effectively simulates the effective principle of manual screening motion, making it particularly suitable for materials that are difficult to process.

4. The lifespan of the sieve is long, and the lifespan of the screened parts is increased while maintenance is reduced.

5. The sieve holes will not be blocked, and an efficient cleaning device system such as silicone rubber balls and ultrasonic waves is used.

6. Optimize the balance of gravity and low dynamic load on the foundation.

☆ Structural principle of oscillating vibrating screen

The guiding device of Xinxiang Dazhong Carbon Black Special Swing Screen can control the residence time of materials, because the horizontal and vertical acceleration increases with the movement of particles, and particles close to the mesh size are successfully separated. Larger particles are transported to the outlet, where the flow rate is controlled by an adjustable guiding device. The residence time of each product can be adjusted by the radial and tangential directions of the swing screen towards the driving axis. The eccentricity can be adjusted from 25 to 40mm, and the low-speed V-belt drive can be adjusted from 120 to 360rpm. The swing screen establishes a horizontal and ground throwing three-dimensional rolling motion, and the material is uniformly dispersed on the entire screen surface from the center to the outer edge, thereby propagating small particles in a spiral motion towards the axial direction to complete the entire screening process. The process is repeated between the screens.

Technical parameters of oscillating vibrating screen

☆ Swing vibrating screen is suitable for industries

The dedicated swing screen for carbon black is mainly used for grading and screening of carbon black, and can also be widely used in the chemical, food and fragrance, plastic, mining, pharmaceutical, wood and plywood, metallurgy, rubber, feed, fertilizer, sugar, and recycling industries.