Main features of CNC lathe feeding rack:
★ No energy consumption, environmentally friendly and energy-saving
★ Can provide a signal that the bar material has been delivered
Beautiful appearance, careful layout, and reasonable materials used
★ Safe and reliable, fully enclosed protection for rod material, capable of high-speed rotation
★ Wide feeding scale, suitable for solid, hollow rods, and special-shaped materials
★ Easy to operate, no need for special training, and the refueling time is less than one minute
★ Small oscillation, high speed, does not affect the machining accuracy of the machine tool, low noise, environmentally friendly, and workers are willing to use it.

The main purpose of the Beituo feeder is:
1. Feed (bar type) materials for various machining lathes.
2. Types of materials that can be sent: metal, plastic, etc
3. Material shapes available for delivery: circular, hexagonal, hollow, etc

Characteristics of Beituo feeder system:
1. Classic high and low pressure hydraulic control system, energy-saving, environmentally friendly and green design.
2. Rigorous design ensures high energy efficiency.
3. Low noise, eliminate leakage.
4. A safe and stable system circuit.
5. Compact structure, powered by hydraulic, stable operating frequency.
6. All components ensure good interchangeability and high start-up rate of the feeder.

Component configuration of Beituo feeder:
1. Oil brush cover	12. Height adjustment screw
2. Return oil drum	13. Adjust the nut
3. Fixing screws for oil return tank	14. Support frame
4. Oil pressure sensing interface	15. Fuel tank
5. Oil inlet pipe interface	16. Foot screw
6. Power control box	17. Inspection hole
7. Inner tube positioning hole	18. Tail fixing bolt
8. Oil return pipe interface	19. Rear steering wheel
9. Pressure plate bolt	20. Rear seat adjustment screw
10. Material machine outer pipe	21. Pressure regulating valve
11. Outer pipe bracket	22. Balance adjustment screw

Beituo Feeding Machine BT Series:
Model number	Total length (mm)	Feeding diameter (mm)	Feed length (mm)	Motor power (kw)	Pressure usage range (kgf)
BT—12	3600—4200	≤12	2500—3000	0.37	1.5—2.0
BT—14	3600—4200	≤14	2500—3000	0.37	1.5—2.0
BT—10	3600—4200	≤10	2500—3000	0.37	1.5—2.0
BT—26	3600—4200	≤26	2500—3000	0.37	1.5—2.0
BT—18	3600—4200	≤18	2500—3000	0.37	1.5—2.0
BT - Single tube	3600—4200	≤26	2500—3000	0.37	1.0—2.0
BT—22	3600—4200	≤22	2500—3000	0.37	1.0—2.0

Beituo Feeding Machine BT Series:
Model number	Total length (mm)	Feeding diameter (mm)	Feed length (mm)	Motor power (kw)	Pressure usage range (kgf)
BT - Single tube	3800	≤18	2500	0.37	1.5—2.0
BT—30	3800	≤30	2500	0.37	1.5—2.0
BT—32	3800	≤32	2500	0.37	1.5—2.0
BT—34	3800	≤34	2500	0.37	1.5—2.0
BT—40	3800	≤40	2500	0.37	1.5—2.0
BT—42	3800	≤42	2500	0.37	1.5—2.0
BT—45	3800	≤45	2500	0.37	1.5—2.0

CNC lathe feeder BT42-2.6M, also known as oil bath lathe feeder

Introduction to the characteristics of CNC lathe feeding rack:
Type: BT42-2.6M
1. Using hydraulic propulsion planning, the piston rod pushes the bar material into the lathe spindle: the data transformation produces hydraulic power effect, and the hydraulic support bar can effectively suppress and eliminate the noise caused by the sensation.
2. The equipment is sensitive and convenient to operate, time-saving, efficient, beautifully laid out, low-noise, with few problems, and has a long service life.
3. The processed rod rotates in an oil bath, ensuring a stable self centering. The collision between the rod and the material tube is reduced by increasing the rotational speed, allowing for high-speed operation.
4. The CNC lathe is equipped with an active feeding machine, which plays a more precise and stable role in lathe turning, reducing labor costs and improving data utilization.
Oil bath feeder is a new type of product in the feeder profession.

The characteristics of the CNC lathe feeding rack include:
★ Classic low-pressure hydraulic control system with energy-saving, environmentally friendly and green features.
★ Stable technical description ensures high power utilization.
★ Can be customized to achieve true waste free.
The plan is concise, the work is flexible, the lifespan is long, the processing accuracy is high, and the material change time is short.
★ Low noise, compact design, no leakage, and no data wear and tear.
★ Same exhaust equipment, safe and stable operating frequency.
All components of the whole machine are welded with argon gas to reduce the probability of deformation.
★ All components ensure excellent interchangeability and high start-up rate of the feeder.
Function: One worker can control 2-3 processing machines, which can effectively reduce the labor intensity of workers and the production cost of the company, greatly improving the automation level and production power of machine tools.