Biosafer-10AS Ultra Pure Water Machine
Process characteristics:
According to the design concept of "layer by layer protection, step by step filtration", pre-treatment is configured based on the source water conditions, which is more targeted; Flexible selection of single-stage or two-stage reverse osmosis processes is more reasonable and economical to use; Dow low-pressure RO membrane from the United States, with a desalination rate of ≥ 98%, is used in combination with automatic cleaning and manual flushing to ensure long-term and efficient operation; The German Heraeus dual wavelength ultraviolet lamp and the American AquaBest digestion instrument can efficiently sterilize and degrade organic matter; Rohm Haas nuclear grade deep treatment polishing mixed bed purification and ultra pure unit water quality resistivity reaches 18.25 Μ Ω· cm@25 ℃; According to usage requirements, imported ultrafiltration membranes and degassing membranes are selected to thoroughly filter out heat sources, soluble gases, and ultra pure water quality. High precision terminal microporous filters are also selected.
Functional features:
An integrated system for producing pure and ultrapure water using tap water as the water source.
Four user password protection function. Real time monitoring of RO and UP water quality operation status.
Complete management functions such as RO pure water and ultra pure water production, system water intake, system circulation, and disinfection.
The ultra pure water system has built-in circulation settings to prepare the best required UP water quality. The ultrapure water circulation system can be freely started and turned off to maintain a low bacterial contamination state.
Adopting imported RO membrane from Dow DOW in the United States. Fully automatic RO membrane anti scaling flushing program, manual/automatic flushing time can be set to extend the service life of RO membrane.
Complete water free protection, high-pressure water full protection functions, and fault alarm functions.
Complete historical alarms, historical water intake records, and consumable life management functions, displaying consumable usage time and automatically reminding replacement upon expiration.
Water quality detection sensor resistance cell constant: 0.01-1, temperature sensitivity ± 0.1 ℃, with automatic temperature compensation function at 25 ℃
Equipped with analog pressure sensors and analog liquid level sensors, it can directly display the inlet pressure and water tank storage capacity.
Ultra large capacity integrated two column ultra purification column module. The whole body column is made of food grade PP material, without any adhesive or impurities. The interior is equipped with imported American Rohm and Haas electronic grade UP6150 and semiconductor grade UP6040 nuclear grade polishing resins, with a maximum effluent quality of 18.25M Ω· cm.
Using Heraeus 185/254nm dual wavelength ultraviolet sterilization from Germany. The energy contained in the 254nm spectral line can effectively destroy the DNA molecular structure of microorganisms such as bacteria and viruses, achieving the purpose of sterilization; The 185nm spectral line can also decompose organic molecules in water and ultimately oxidize them to carbon dioxide, effectively removing TOC.
Using low voltage 24VDC as the main power supply, with a layout of water and electricity separation, in compliance with safety regulations, high-strength engineering plastic chassis, to prevent corrosion and rust.
Ultra low radiation. Adopting advanced electromagnetic compatibility design, it has strong anti-interference ability and low noise.
Working conditions:
Water source: Urban municipal tap water (with an additional strengthened pre-treatment unit when TDS ≥ 300);
Temperature: 5-45 ℃;
Source water pressure: 1-5Kg/cm2
Power supply: 220V 50Hz
Power: 30-80W
Technical Parameter:
Water production capacity (25 ℃): 5L/h
Pure water quality: conductivity≤0.5μS/ cm@25 ℃The water quality standard is superior to the third level water standard of China National Laboratory Water (GB6682-2008)
Ultra pure water quality: conductivity ≤ 0.055 μ S/ cm@25 ℃; Electrical resistivity 18.25 Μ Ω· cm@25 ℃, the water quality standard is better than the first-class water standard of China National Laboratory Water (GB6682-2008)
Water intake flow rate: RO pure water: 2L/min UP ultra pure water: 1.8L/min
Heat source:/
TOC:<10ppb
Microorganisms:<1cfu/ml
Microparticle: (greater than 0.2 μ m) Content:<1/ml
Screen size: 4.3 inches
Dimensions: length x width x height: 455 x 535 x 515mm
remarks:
This product has obtained CE certification.
Related products:
model | Biosafer-5AS |
Biosafer-10AS |
Biosafer-20AS |
Biosafer-30AS |
Biosafer-40AS |
water source | Municipal tap water |
Municipal tap water |
Municipal tap water |
Municipal tap water |
Municipal tap water |
water yield |
5L/h |
10L/h |
20L/h |
30L/h |
40L/h |
Pure water quality |
Conductivity ≤ 0.5 μ S/ cm@25 ℃ |
Conductivity ≤ 0.5 μ S/ cm@25 ℃ |
Conductivity ≤ 0.5 μ S/ cm@25 ℃ |
Conductivity ≤ 0.5 μ S/ cm@25 ℃ |
Conductivity ≤ 0.5 μ S/ cm@25 ℃ |
Ultra pure water quality |
Electrical resistivity 18.25 Μ Ω· cm@25 ℃ |
Electrical resistivity 18.25 Μ Ω· cm@25 ℃ |
Electrical resistivity 18.25 Μ Ω· cm@25 ℃ |
Electrical resistivity 18.25 Μ Ω· cm@25 ℃ |
Electrical resistivity 18.25 Μ Ω· cm@25 ℃ |
RO water/ultrapure water intake flow rate | 2/1.8 L/min |
2/1.8 L/min |
2/1.8 L/min |
2/1.8 L/min |
2/1.8 L/min |
heat source | / |
/ |
/ |
/ |
/ |
TOC |
<10ppb |
<10ppb |
<10ppb |
<10ppb |
<10ppb |
microorganism |
﹤1cfu/ml |
﹤1cfu/ml |
﹤1cfu/ml |
﹤1cfu/ml |
﹤1cfu/ml |
microparticle(Greater than 0.2 μ m) |
﹤1/ml |
﹤1/ml |
﹤1/ml |
﹤1/ml |
﹤1/ml |