VIP member
Product details
In the light industry and heavy industry professions, the feeding machine is an important mechanical equipment. Below, we will specifically introduce the BT30-2.6M lathe oil bath feeding machine. Type: BT30-2.6M (single tube)
Features:
1. The equipment is easy to operate, time-saving, efficient, layout optimized, has low noise, few problems, and has a long service life.
2. Using hydraulic propulsion planning, the piston rod pushes the bar material into the lathe spindle: the data transformation produces hydraulic power effect, and the hydraulic support bar can effectively suppress and eliminate the noise caused by the sensation.
3. The processed rod rotates in an oil bath, ensuring a stable self centering. The collision between the rod and the material tube is reduced by increasing the rotational speed, allowing for high-speed operation.
4. The CNC lathe is equipped with an active feeding machine, which plays a precise and stable role in lathe turning, reducing labor costs and improving data utilization.
The general explanation of oil bath feeding machine refers to all feeding machines that use the method of immersing materials in oil to operate, usually abbreviated as oil bath feeding machine. It is mainly used for various equipment that can continuously process materials to complete active feeding, and then improve the processing power and degree of automation of the equipment. The most commonly used type of machine currently is the CNC lathe, which can process various types of bar materials (including round bar materials, hexagonal materials, hollow materials, etc.). Therefore, the oil bath feeder we usually refer to refers to the oil bath feeder used for CNC lathes. Because it uses hydraulic pressure from the hydraulic station to push the processed bar materials into the CNC lathe spindle pneumatic chuck or hydraulic chuck through the push rod, it is also known as the oil pressure feeder.
Working principle of oil bath feeding machine
The oil bath type feeding machine consists of five parts: hydraulic station, feeding tube, pushing rod, bracket, control circuit, etc. Its operating principle is that the hydraulic station supplies hydraulic oil to the feeding tube at a stable pressure (O.1~O.2 Mpa), and the hydraulic pressure pushes the pushing rod (piston rod inside the feeding tube) to push the processed rod into the CNC lathe spindle and clamp it. The rod is immersed in the hydraulic oil inside the feeding tube. When the CNC lathe moves the rod to change, due to the damping effect of the hydraulic oil, the rod will float up from the feeding tube. With the increase of speed, the rod will actively suspend in the center of the feeding tube to prevent collision and friction between the rod and the wall of the feeding tube.
When the spindle of the CNC lathe stops changing and requires feeding, the oil pressure pushes the push rod to feed the bar material into the spindle of the CNC lathe at a regular length.
After the rod material is actively delivered, the hydraulic station will reverse the hydraulic oil in the material pipe back to the oil tank. Under the effect of vacuum, the pushing rod will actively retract to the starting position, and the CNC lathe will actively be in a waiting state for feeding. The control circuit will announce a warning signal to inform the operator to feed.
Features:
CNC lathes are usually equipped with feeding machines such as oil bath feeding machines, storage feeding machines, and heavy hammer feeding machines. The storage type feeder has a large storage capacity and can complete continuous feeding without stopping the machine, but the quotation is relatively high; The layout of the heavy hammer feeder is simple and the quotation is cheap, but it can only be used for machining parts with low precision requirements, and the noise and oscillation are relatively high.
Oil bath feeding machine is a new product of feeding machine. Compared with the above two types of feeding machines, it has the advantages of wide feeding diameter scale (usually (1) 5~(1) 42 mm or larger), long feeding length (usually within 3 meters), easy operation, good stability, low noise, no wear of bar material, few operating problems, long service life, and moderate quotation. It is particularly suitable for high-speed, long bar material, and fine workpiece processing, and has become a feeding machine with more CNC lathes.
Development prospects
In recent years, due to the continuous increase in workers' wages, many companies have encountered difficulties in recruiting workers, which has forced them to update and renovate equipment, advance the automation level of equipment, and reduce labor costs. The oil bath feeding machine can be matched with various CNC lathes to complete automatic feeding work, improve the work efficiency of CNC lathes, and is increasingly widely used at home and abroad.
The new generation of oil bath feeders not only has the characteristics of the times in appearance, but also has made a series of technical improvements to further advance the safety and reliability of oil bath feeders, adding oil filtration equipment and optimizing the hydraulic oil system; Installed hydraulic push rod transformation equipment, improved raw material transportation system, and so on. Then, due to the uncleanliness of the processed material, the hydraulic oil was briefly mixed with foreign objects, causing blockages in the oil pump and burning the motor; And due to the long-term rotation of the processed material, the contact end between the push rod and the processed material undergoes deformation and jumps, which are common problems in oil bath feeders.
Therefore, the oil bath feeding function is widely used in various types of CNC lathes and has good development prospects.
Main purpose: To feed (bar type) materials for various machining lathes.
System features:
★ Classic low-pressure hydraulic control system with energy-saving, environmentally friendly and green design.
★ Rigorous process design improves energy utilization efficiency.
★ Customizable, achieving true waste free.
★ Simple structure, flexible operation, long service life, high processing accuracy, and short material replacement time.
★ Low noise, compact structure, no leakage, and no material wear.
★ Unique exhaust system, safe and stable operating frequency.
All components of the whole machine are welded with argon gas to reduce the probability of deformation.
★ All components ensure good interchangeability and high start-up rate of the feeder.
Effect: The average efficiency of a single machine is improved by 60%, and one worker can operate up to 6 machine tools, saving a lot of tailings.
1. The equipment is easy to operate, time-saving, efficient, layout optimized, has low noise, few problems, and has a long service life.
2. Using hydraulic propulsion planning, the piston rod pushes the bar material into the lathe spindle: the data transformation produces hydraulic power effect, and the hydraulic support bar can effectively suppress and eliminate the noise caused by the sensation.
3. The processed rod rotates in an oil bath, ensuring a stable self centering. The collision between the rod and the material tube is reduced by increasing the rotational speed, allowing for high-speed operation.
4. The CNC lathe is equipped with an active feeding machine, which plays a precise and stable role in lathe turning, reducing labor costs and improving data utilization.
The general explanation of oil bath feeding machine refers to all feeding machines that use the method of immersing materials in oil to operate, usually abbreviated as oil bath feeding machine. It is mainly used for various equipment that can continuously process materials to complete active feeding, and then improve the processing power and degree of automation of the equipment. The most commonly used type of machine currently is the CNC lathe, which can process various types of bar materials (including round bar materials, hexagonal materials, hollow materials, etc.). Therefore, the oil bath feeder we usually refer to refers to the oil bath feeder used for CNC lathes. Because it uses hydraulic pressure from the hydraulic station to push the processed bar materials into the CNC lathe spindle pneumatic chuck or hydraulic chuck through the push rod, it is also known as the oil pressure feeder.
Working principle of oil bath feeding machine
The oil bath type feeding machine consists of five parts: hydraulic station, feeding tube, pushing rod, bracket, control circuit, etc. Its operating principle is that the hydraulic station supplies hydraulic oil to the feeding tube at a stable pressure (O.1~O.2 Mpa), and the hydraulic pressure pushes the pushing rod (piston rod inside the feeding tube) to push the processed rod into the CNC lathe spindle and clamp it. The rod is immersed in the hydraulic oil inside the feeding tube. When the CNC lathe moves the rod to change, due to the damping effect of the hydraulic oil, the rod will float up from the feeding tube. With the increase of speed, the rod will actively suspend in the center of the feeding tube to prevent collision and friction between the rod and the wall of the feeding tube.
When the spindle of the CNC lathe stops changing and requires feeding, the oil pressure pushes the push rod to feed the bar material into the spindle of the CNC lathe at a regular length.
After the rod material is actively delivered, the hydraulic station will reverse the hydraulic oil in the material pipe back to the oil tank. Under the effect of vacuum, the pushing rod will actively retract to the starting position, and the CNC lathe will actively be in a waiting state for feeding. The control circuit will announce a warning signal to inform the operator to feed.
CNC lathes are usually equipped with feeding machines such as oil bath feeding machines, storage feeding machines, and heavy hammer feeding machines. The storage type feeder has a large storage capacity and can complete continuous feeding without stopping the machine, but the quotation is relatively high; The layout of the heavy hammer feeder is simple and the quotation is cheap, but it can only be used for machining parts with low precision requirements, and the noise and oscillation are relatively high.
Oil bath feeding machine is a new product of feeding machine. Compared with the above two types of feeding machines, it has the advantages of wide feeding diameter scale (usually (1) 5~(1) 42 mm or larger), long feeding length (usually within 3 meters), easy operation, good stability, low noise, no wear of bar material, few operating problems, long service life, and moderate quotation. It is particularly suitable for high-speed, long bar material, and fine workpiece processing, and has become a feeding machine with more CNC lathes.
In recent years, due to the continuous increase in workers' wages, many companies have encountered difficulties in recruiting workers, which has forced them to update and renovate equipment, advance the automation level of equipment, and reduce labor costs. The oil bath feeding machine can be matched with various CNC lathes to complete automatic feeding work, improve the work efficiency of CNC lathes, and is increasingly widely used at home and abroad.
The new generation of oil bath feeders not only has the characteristics of the times in appearance, but also has made a series of technical improvements to further advance the safety and reliability of oil bath feeders, adding oil filtration equipment and optimizing the hydraulic oil system; Installed hydraulic push rod transformation equipment, improved raw material transportation system, and so on. Then, due to the uncleanliness of the processed material, the hydraulic oil was briefly mixed with foreign objects, causing blockages in the oil pump and burning the motor; And due to the long-term rotation of the processed material, the contact end between the push rod and the processed material undergoes deformation and jumps, which are common problems in oil bath feeders.
Therefore, the oil bath feeding function is widely used in various types of CNC lathes and has good development prospects.
Main purpose: To feed (bar type) materials for various machining lathes.
System features:
★ Classic low-pressure hydraulic control system with energy-saving, environmentally friendly and green design.
★ Rigorous process design improves energy utilization efficiency.
| Drive power | 0.75kw |
| Processing diameter | 5-42（mm） |
| Machining length | 0-3000（mm） |
| Feeder length | 3900（mm） |
| Cooling method | Standard oil cooling method |
| Model number | HB-42 |
★ Simple structure, flexible operation, long service life, high processing accuracy, and short material replacement time.
★ Low noise, compact structure, no leakage, and no material wear.
★ Unique exhaust system, safe and stable operating frequency.
All components of the whole machine are welded with argon gas to reduce the probability of deformation.
★ All components ensure good interchangeability and high start-up rate of the feeder.
Effect: The average efficiency of a single machine is improved by 60%, and one worker can operate up to 6 machine tools, saving a lot of tailings.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-