20t/h fully automatic sodium ion exchangerIt is specifically designed to remove calcium and magnesium ions from water, with an efficiency of up to 99%. It can also remove algae and suspended solids from water, making the treated water soft and clear. When raw water containing hardness ions passes through the resin layer inside the water softener, the calcium (Ca2+) and magnesium (Mg2+) ions in the water are exchanged and adsorbed by the resin, while the (Na2+) ions released by the same mass are released.

The sodium ion exchanger adopts a floating bed countercurrent regeneration process, and the effective utilization rate of resin reaches over 85%

Structure of 20t/h fully automatic sodium ion exchanger:

1. Automatic control device: According to user needs, a fully automatic controller with two control modes, time control and flow control, can be configured, and can be optionally equipped with control valves such as Runxin and Fulaik. It can also choose hydraulic, pneumatic, and electric multi valve control systems.

2. Tank body: According to user requirements, exchange tanks and salt tanks can be made of materials such as fiberglass, carbon steel lined with rubber, stainless steel, etc.

3. Accessories section: including water distribution device, salt absorption device, pipeline accessories, etc.

The sodium ion exchanger adopts a floating bed countercurrent regeneration process, and the effective utilization rate of resin reaches over 85%

Characteristics of a 20t/h fully automatic sodium ion exchanger:

1. The sodium ion exchanger adopts a floating bed countercurrent regeneration process, and the effective utilization rate of resin reaches over 85%.

2. Adopting a back pressure salt supply system, the quantitative salt supply is controlled by a flow meter, without the need for additional salt tanks and salt pumps. It has a short regeneration time, low salt consumption, high water production, low self consumption, and low operating costs. Compared with fixed beds, it saves more than 30% salt, uses about 4% of the water production for cleaning, and is controllable and adjustable, with significant energy-saving effects.

3. The equipment has a beautiful and compact structure, occupies a small area, does not require a large factory building, saves infrastructure investment, and is easy to install after leaving the factory. It only needs to connect the inlet and outlet pipes and power supply to start producing water.

4. For high hardness water ≤ 30mmol/L, it can be softened to residual hardness ≤ 0.03mmol/L in one go.