VIP member
1.5-inch Ingersoll Rand pneumatic diaphragm pump
Release time: March 21, 2015 11:32:04 Brand: ARO Ingersoll Rand Diaphragm Pump Ratio: 1:1 Flow rate: 90 gallons/minute (341 liters/minute) Displacemen
Product details
1 Advantages of Ingersoll Rand Pneumatic Diaphragm Pump
1. Can run empty
2. No electric spark
3. Optional materials are suitable for most fluids and allow solid particles to pass through;
4. Self suction start, working, ready to use, ready to stop, not afraid of blockage;
5. Automatically adjust the flow rate based on back pressure;
6. No dynamic seal, no material contamination;
7. Low shear force, not easily damaging the material structure;
8. No foundation required, can be used as a mobile pump.
2. No electric spark
3. Optional materials are suitable for most fluids and allow solid particles to pass through;
4. Self suction start, working, ready to use, ready to stop, not afraid of blockage;
5. Automatically adjust the flow rate based on back pressure;
6. No dynamic seal, no material contamination;
7. Low shear force, not easily damaging the material structure;
8. No foundation required, can be used as a mobile pump.
2 1.5-inch Ingersoll Rand Pneumatic Diaphragm Pump Model List
| Ingersoll Rand model | caliber | Shell material | Diaphragm material |
| 666170-344-C | 1.5 inches | aluminum alloy | PTFE |
| 666170-3EB-C | 1.5 inches | aluminum alloy | Shandao Rubber |
| 66617B-344-C | 1.5 inches | stainless steel | PTFE |
| 66617B-3EB-C | 1.5 inches | stainless steel | Shandao Rubber |
| 66617C-344-C | 1.5 inches | cast iron | PTFE |
| 66617C-3EB-C | 1.5 inches | cast iron | Shandao Rubber |
3 Model Description of 1.5-inch Ingersoll Rand Pneumatic Diaphragm Pump
4 Technical specifications for 1.5-inch Ingersoll Rand pneumatic diaphragm pump
| ratio | 1:1 |
| traffic | 90 gpm(340.7lpm) |
| Displacement per cycle | 0.64 gallons (2.42 liters) |
| air intake | 1/2 - 14 N.P.T.F. - 1 |
| Fluid inlet | 1 - 11-1/2 N.P.T.F. - 1 Rp 1 1 - 11 BSP, |
| fluid outlet | 1-1/2 11-1/2 N.P.T.F. - 1 Rp 1-1/2 (1-1/2-11 BSP) |
| work pressure | 120PSI(8.3bar) |
| Can be determined by particle size | 1/4in(6.4mm) |
| Dry suction and vacuuming | 19ft（ 5.8m） |
| weight | 666170-X-C aluminum alloy: 51.5 lbs 23.46kg 666171-X-C stainless steel: 84.5 lbs 38.3kg 666172-X-C cast iron: 79.5 lbs 36.1kg |
5 Dimensional drawing of 1.5-inch Ingersoll Rand pneumatic diaphragm pump
6 Flow Curve of 1.5-inch Ingersoll Rand Pneumatic Diaphragm Pump
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-